Stripping all the chrome. One of the single most important steps in saving money on a paint job is to strip your Mustang as much as possible yourself. This means taking off anything and everything that won't be painted. The more you take off the less the painter has to mask around. Masking not only takes their time (which costs you money) but it also results in areas that simply can't get a full coat of paint. If you take everything off, then the painters can simply scuff and spray, which will give you better and more consistent coverage. Proper rolling technique: When rolling paint on the wall, get the roller skin evenly loaded with paint and make a V,N or M pattern on the wall, this is to spread the paint across the entire section you will be rolling, then roll back across the section and even out the paint. To properly "lay off" each section, make a final pass of the section applying light pressure to the roller frame arm end of the roller skin and bringing the nap mark (mark created on the pressure applied side of roller skin) across from the beginning of the section to the end of the section, and just repeat all the way down the wall.The V,N or M pattern, will be determine by how far the paint will spread, a V is for less spreading paint and M is for farther spreading paints. Do not "dry roll", which means trying to roll to much of a section at once with very little paint on the roller. Just as important, do not apply to much, if you find you are applying to much, increase the size of the section you are painting i.e. from a V pattern to an N or a N pattern to a M. A large whitewash brush is best for applying the wash. One should not attempt to brush out the coating, as in applying oil paint, but simply spread the whitewash on as evenly and quickly as possible.
Mixing. Paste paints, such as aluminum, resin-emulsion, and lead-in-oil, should be stirred with a stiff paddle and reduced to painting consistency with the liquids recommended on the manufacturer's labels. Treat yourself to a good lunch and forget the diet. It is amazing what some pizza or a good burger will do for the afternoon painting push. There are 2 methods for using primer to aid in color coverage. In the first case, when applying light color paint to a darker wall color, you can maximize your color coverage by applying a white primer coat before applying your new paint. In the second case, when painting dark color paint onto a lighter wall color, maximize your color coverage by having your primer "tinted" the same color as your new paint. Many people are surprised to learn that this is possible. But the fact is, your local paint retailer will happily add any color they carry to any primer you want (thereby "tinting" it) for free! Select the right product. There is a dedicated paint for practically every surface, including tiles and appliances, such as fridges. For high-traffic areas consider scuff-resistant multi-surface paints that can be used on both wood and walls. Kitchens and bathrooms benefit from specialist formulas designed to cope with humidity without flaking.