You scuff up existing paint for two reasons. First, you want to get rid of any oil, grease or dirt trapped in the top layer of paint. This is the stuff that cleaners and degreasers can't get off. The second reason to scuff is to set up a physical bond for the new primer and paint to adhere to. You want to give the old paint some tooth so the new sticks better.
WALL PAINTING TIPS. · Paint around the trim first, including edging around the ceiling. · When painting with a gloss finish, make the final brush strokes away from the light source of the room. The tiny ridges that a brush leaves won't be as pronounced. Use the same "wet to dry" method of painting.
STIPPLING. Whether you desire the effect of stippling (tiny paint dots) as a decorative effect, or if you have a wall which has an uneven surface and you feel you can hide the defect by stippling it, you may accomplish this result very simply.
A Gloss paint is easy to clean and resists scuffs better. This is ideal for rooms that are constantly used. Most gloss paints are best recommended to use on woodworks, baseboards, kitchen and bathroom walls, doorjambs, and window casings. The downside of using gloss paints, however, is the noticeable imperfections in the wall surface.
The stencil must be held very firmly against the surface with one hand, and the stencil brush worked over it quickly with the other hand. Or, if you have an assistant, it is best for one person to keep the stencil steady, while the other does the painting. In removing the stencil, make sure you pick it up without smudging.
Essential Guide to Paint. Paint is your passport to colour and arguably the easiest, least costly and most immediate way to transform a home. It can be as simple as brilliant white, but that would exclude all the other drop-dead gorgeous colours. Paradoxically, it's the vast choice that often poses a problem - there are just so many brands, types and shades on the market.
The casein, which serves as the glue binder, should be soaked in 2 gallons of hot water until thoroughly softened, which should be approximately 2 hours. After dissolving the trisodium phosphate in 1 gallon of water it should be added to the casein, stirring the mixture until the casein dissolves. This solution should be mixed with the lime paste and 3 gallons of water.