Fortunately, you can always get your primer tinted for free. Getting your primer colored the same as your paint will save you a coat of paint. Of course, I always recommend doing a minimum of 2 coats of paint so that your finish sheen looks consistent.
By licensing these names, paint companies and retailers are taking advantage of the popularity of these well-known brands to attract you to these paints; that way they don't have to use obnoxious colors to bring your attention to their color wheel. If you look at the colors in these displays you will notice that they are generally missing those bright, saturated tones. Instead, most of the colors are more neutralized. Naturally, these colors are much more attractive to paint on a wall in your home.
Anti-condensation paints are used for rooms with humid conditions such as kitchen and bathrooms. This paint is usually formulated to prevent condensation and often includes fungicide.
Take your time there is no rush. There is nothing wrong with having your project take a couple of weeks.
Paint Selection. Most paints are purchased ready-mixed but, in their selection, consideration should be given to the fact that surfaces vary in their adaptability to paint and atmospheric or other conditions having an adverse effect on paint performance. In addition to the normal weathering action of sun and rain, outside house paints are sometimes exposed to other attacking elements, such as corrosive fumes from factories or excessive amounts of wind-driven dust.
The area covered by a gallon of whitewash depends upon the nature of the surface, but ordinarily a gallon will cover about 225 sq. ft. on wood, about 180 sq. ft. on brick, and about 270 sq. ft. on plaster. The formulas mentioned will make from 10 to 14 gallons of whitewash. If a smaller quantity is desired, the amount of each ingredient should be reduced proportionately.
Since the trim is the first to go, the main body of the home will be shortly behind requiring painting. If the trim was recently painted, and a few years later the body is ready for paint, all the trim will need to be covered, commonly referred to as masking off. Masking off expends time, labor and material, which adds to the bottom line cost to the remaining 40%, typically costing an additional 25% for masking trim. Thus costing 25% more after both trim and body portions are painted in separate years.