Preparation, the key to a successful paint job is to take the correct steps when preparing the job. Preparation for this article, has two parts, the first part is wall prep. The walls you are going to paint may have nail holes or imperfections that need to be filled before you paint. The proper way to fill them, if they are smaller is with water putty, by simply forcing a little bit of the putty in the hole and breaking it off flush with the surface. For larger depressions, use a drywall compound or spackle, which may require a second application to fully fill the indentation and make the repair/"patch" flush with the wall. The term paint is used to include paints, varnishes, enamels, shellacs, lacquers, and stains. • Paints are composed of mineral pigments, organic vehicles, and a variety of thinners all combined. • Varnishes are resins dissolved in organic thinners. • Enamels are pigmented varnishes. • Shellac is lac gum dissolved in alcohol. • Lacquers may be both pigmented or clear - the liquid portion usually is treated nitrocellulose dissolve in thinners. • Stains may be pigmented oil or a penetrating type. Many of these materials, such as paints, varnishes, and lacquers, are formulated for specific purposes: • Outside house paints and exterior varnishes are intended to give good service when exposed to weathering • Interior wall paints are formulated to give excellent coverage and good wash-ability. • Floor enamels are made to withstand abrasion. • Lacquers are formulated for rapid drying. • There are also formulas which provide extra self-cleaning, fume- resisting, waterproofing, hardening, flexibility, mildew-resisting, resistance to fading, and breathing qualities. Painting trim is normally done by roller and brush, not sprayed, so more manual labor is required painting trim, and most cases costing 60% of the total exterior painting job.
Anti-condensation paints are used for rooms with humid conditions such as kitchen and bathrooms. This paint is usually formulated to prevent condensation and often includes fungicide. Now, decide WHAT you want to paint. Very important...you do NOT need to know how to draw. That's the great thing about painting, you can create even if you've never had a lesson. Don't get me wrong, art school is great. But don't let the lack thereof deter you from creating. You do not have to have a teacher to tell you how to create. You do need to know a few basic techniques, but from there let your imagination fly! When deciding what to paint, go to some websites about artists or Google famous artists to get inspired. Again, do not let a lack of training deter you from painting! Many of the great artists of the past had no training either. Many can't draw stick figures, but they can paint because the colors give you amazing options of expression! You may also go to my websites mentioned below or Google me to see all the crazy work I've created. My personal preference has been to create a large variety of work to keep it interesting and versatile. I did not want to be that artist who only painted one thing over and over. To me that's boring, and it should be boring to you too. Any known artist of the past has a vast variety of work. You'll also find that it makes it more interesting to you while you're doing it, because you won't ever get bored, you'll always be wondering how it'll turn out. For localities where such conditions exist, self-cleaning paints should be selected. These paints are usually so designated on the label. Concrete, plaster, and metal surfaces each present special problems in painting. For instance, paint for use on masonry or new plaster must be resistant to dampness and alkalies, and paints used on steel must have rust-inhibitive properties. Satin paints offer a good combination of easy-clean and moderate sheen. These paints go a step above eggshell in scrubbing ability. They perform and look great in just about any room.