Masonry Walls and Ceilings. Interior masonry walls and ceilings above grade may, in general, be painted in much the same manner as plaster surfaces. Here again, it is necessary to allow adequate time for the masonry to dry before applying paint and, in addition, attention should be given to the preparation of the surface. When decorating a wall containing Portland cement (concrete, for example), it is essential to take precautions against the attack of alkali. For this purpose, alkali-resistant primers such as rubber-base paints may be used when oil paints are to follow.
Like this, it will actually take quite a while to reach a number that is close enough to the yellow color you've chosen that you can't tell any difference (and mathematically, you will never actually reach an average of 4!)
What colors are prevailing - tonal or local, warm or cold?
Store your leftover paint in plastic Rubbermaid beverage jugs or other plastic seal-able containers. Paint left in the can always gets funny after time. Either the can isn't properly sealed of it gets exposed to extreme heat or cold. I like to store my paint inside where the temperature is controlled.
Playing fun games where word sounds are changed, learning silly rhymes and making up nonsense words helps children develop their phonics skills and auditory processing. If these are simply taught in a formal way, the child feels no real ownership and finds it harder to remember all the different sounds the written letters represent. If he plays games and experiments with the sounds in words, his feeling of being in control of the words and the sounds is greater, making it easier for him to learn and remember his phonics. He develops an actual concept of how sounds make up words.
Use Tinted Primer for Dark Paint Colors.In our second case, suppose you want to apply a deep, dark blue to a beige wall. The good news is that it will be easier to darken a light color than it was to lighten a dark color. In fact, it may only take 2 - 4 coats to get total color coverage in this scenario. The bad news is that if you start out with a white primer you are already moving in the wrong direction. Doing so could increase the number of paint coats you need to 3 - 6... plus the coat of primer! That's a lot of painting!
The principal ingredient in whitewash is lime paste. A satisfactory paste can be made with hydrated lime, but better results are obtained by using quicklime paste that has been slaked with enough water to make it moderately stiff. The lime paste should be kept in a loosely covered container for at least several days. Eight gallons of stiff lime paste can be made by slaking 25 lbs. of quicklime in 10 gallons of water, or by soaking 50 lbs. of hydrated lime in 6 gallons of water. After soaking, the paste should be strained through a fine screen to remove lumps or foreign matter.