If white color can be presented as a sum of all colors, then black is kind of like a lack of color. However, this color is not very important in the interior. Every evening we go back to night with pleasure to rejuvenate our strength. It is this color that gives the beginning to everything new. Black color is indispensable for contrast accentuation and separation of other colors, giving them brightness and expressiveness. It makes the interior graphic and clear as well as very stylish.
Hiding power comes from the paint's pigment and is affected by the manner and thickness of the application. Color retention is the ability to maintain its original color during exposure to sunlight, etc. Chalking resistance prevents the white chalky powder from forming on the surface and lightening the color of the paint. Chalking occur over a period of time. Blister resistance keeps excessive moisture from coming through the substrate and affecting the paint layer. Tip: if paint is applied over a damp or wet surface, blistering is imminent.
Either edge of trim is painted with body color, and is where caulking is applied at most 90 degree angles. Painting trim only, cannot feasibly include caulking, as this fails and opens up over time. Most homes need new caulking when painting the exterior, and a close inspection can determine.
The term paint is used to include paints, varnishes, enamels, shellacs, lacquers, and stains. • Paints are composed of mineral pigments, organic vehicles, and a variety of thinners all combined. • Varnishes are resins dissolved in organic thinners. • Enamels are pigmented varnishes. • Shellac is lac gum dissolved in alcohol. • Lacquers may be both pigmented or clear - the liquid portion usually is treated nitrocellulose dissolve in thinners. • Stains may be pigmented oil or a penetrating type. Many of these materials, such as paints, varnishes, and lacquers, are formulated for specific purposes: • Outside house paints and exterior varnishes are intended to give good service when exposed to weathering • Interior wall paints are formulated to give excellent coverage and good wash-ability. • Floor enamels are made to withstand abrasion. • Lacquers are formulated for rapid drying. • There are also formulas which provide extra self-cleaning, fume- resisting, waterproofing, hardening, flexibility, mildew-resisting, resistance to fading, and breathing qualities.
HUE-VALUE-INTENSITY. Hue: Without getting too technical, and to put things into laymen's terms, hue is just another word for color. For instance, grass and leaves are two variations of a green hue.
If paints have been allowed to stand and hard lumps or skin have formed, the skin or scum should be removed, after which the paint can be stirred and strained through screen wire or through one or two thicknesses of cheesecloth.
Once the drywall compound/spackle has had sufficient time to dry, you will need to lightly sand the surface of the repair to smooth out any ridges that may have been caused while "coating" the patch. Once you have the surface sanded smooth, take a wet sponge or cloth and, by lightly washing/rubbing, blend the outside edge of the drywall compound/spackle back into the wall. For a smaller repair, you can wash away the excess drywall compound, leaving only the compound/spackle only in the area where the indent was filled. For a larger hole, after filling, sanding and using a wet sponge to blend the outside edge of the compound back into the wall, it may be necessary to texture the area in order to give the smooth patch the appearance of the existing wall.