Coloring pages of alvin and the chipmunks and the chipettes

Published at Friday, 27 March 2020.

Stripping all the chrome. One of the single most important steps in saving money on a paint job is to strip your Mustang as much as possible yourself. This means taking off anything and everything that won't be painted. The more you take off the less the painter has to mask around. Masking not only takes their time (which costs you money) but it also results in areas that simply can't get a full coat of paint. If you take everything off, then the painters can simply scuff and spray, which will give you better and more consistent coverage. If you decide to do your own body work discuss it with the paint shop first. They'll probably have recommendations on the type of primer you use. Some brands will be more compatible with their primers or color coats. The rule of thumb is to stay within the same brand of paint, both for prep and color. Even the cheapest paint shops typically use a brand name on their intermediate and higher paint jobs. Find out what it is and use the same brand as your primer coat. This will ensure you don't create adhesion problems for yourself down the road. Intensity refers to a colors brightness or saturation. Intensity refers to how pure a color is. For instance, if you were to use cadmium red straight from the tube, it would have a high intensity. If you were to mix it with another color however, its intensity would be diminished.

Cutting Down on Paint Chemicals. Everyone knows the nasty smell of paint drying - worse with oil-based paints, but also noticeable with vinyl emulsions. This is caused by paint solvents containing VOCs. They are proven health risks, and can cause allergies, headaches and breathing problems and irritate eyes, nose and throat. They are also an environmental hazard. Some acrylics are also recommended for exteriors (over the same kinds of materials as vinyl paints). Here it has a big advantage - you don't have to pick your painting weather so carefully. It can be applied on humid days and in cold seasons, so long as the temperature is a few degrees above freezing. Brass lighting fixtures and andirons may be polished and kept bright by coating with metal lacquers. The lacquers, held in cans under pressure, may be sprayed directly from the container. Old-fashioned or unattractive lighting fixtures may be painted with ceiling or wall paint to harmonize with the surrounding surfaces. First, and foremost don't buy cheap paint. I prefer using Sherwin Williams Duration or Superpaint brands. They will run around $40 a gallon and $35 a gallon respectively. Expect to get coverage of about 350 square feet per gallon and two coats are always necessary. Another advantage of using higher grade paint is that touch-up down the road will blend perfectly.

Leave a Reply