Note: How to use an airless paint sprayer. I'm sure the guy at the rental store showed you how to use the airless (typically with his limited experience of actually painting a house), so hopefully I can offer you a couple new ideas on how to paint your home using an airless paint sprayer. When you first get the airless home, set it in the middle of the area that you would like to start painting. Typically the length of the hose is around 50'. Stretch out the hose prior to painting so that you don't have to worry about unraveling it while you are painting on a ladder. It is a good idea to have a 100' extension cord so that you can bring the airless anywhere you wish to paint without any restrictions. Tip: before you plug in the airless into the extension cord, MAKE SURE THE AIRLESS IS OFF! You don't want the airless to start pumping without paint! Now, when you go to set up the airless, before you turn it on, it's a good rule of thumb to have a second empty bucket next to your bucket of paint. I'll explain why in a second. Place both buckets side by side and place the intake hose (with the wire mesh filter end) into your 5 gallon bucket of paint while the primer hose (usually a lot smaller, about the size of a pencil'ish) is placed in the empty bucket of paint. Before you turn on the machine make sure that the airless is set to prime the machine first. There is a primer valve that you can rotate between prime and paint. A good way to see if the valve is set to prime or paint is to try this little test prior to turning the machine on. While turning the valve clockwise a couple times you will notice that the valve handle will separate from the machine in one position (leaving a slight crack between the valve and machine) while the other position the valve is close to the machine. The position in which the valve is separated from the machine is considered the primer position. Do this multiple times to see what I'm talking about. Don't worry if you keep on spinning the valve, you can spin it a million times in one direction and it won't hurt it. Years ago, paint was paint. One kind looked, smelled, was applied and eventually dried much like another. Things are different now. Besides oil paints, you can choose from a new set of paints. It'll pay you to know about them. • There are water paints you can use outside. (You clean your brushes under the faucet and use the garden hose to get spatters off the shrubbery.) • There are finishes so tough they withstand even attacks from the neighbors' children. • There are paints that dry so fast you start the second coat as soon as you finish putting on the first. • There are colors in glittering confusion. Red is the color of fire, it instills joy, strength and confidence in people. In some languages red is a synonym of beauty and wealth. But we shouldn't forget that it is also the most aggressive color - if there is too much of this color, it irritates and wears you out. On the other hand small accents of red in the interior cheer you up and put you into a good mood. If red is the predominant color in your interior, it sets you into active and determined mode.
STIPPLING. Whether you desire the effect of stippling (tiny paint dots) as a decorative effect, or if you have a wall which has an uneven surface and you feel you can hide the defect by stippling it, you may accomplish this result very simply. Intensity refers to a colors brightness or saturation. Intensity refers to how pure a color is. For instance, if you were to use cadmium red straight from the tube, it would have a high intensity. If you were to mix it with another color however, its intensity would be diminished. SECONDARY COLORS. When you mix two primary colors together, you get a secondary color. The secondary colors are orange, green and violet. Orange is made by mixing red with yellow. Green is made by mixing blue and yellow. Violet is made my mixing blue with red. Usually on exposed air ducts of galvanized metal a primer coat of zinc dust-zinc oxide paint is used, before the finish coat is applied.