Wood Walls and Trim. New interior walls and wood trim should be smoothed with sand-paper and dusted before painting or varnishing. To preserve the grain of the wood, the surface may be rubbed with linseed oil, varnished or shellacked, and waxed. If an opaque finish is desired, semi-gloss paint thinned with 1 pint of turpen-tine per gallon of paint or the primer-sealer previously described for walls may be used as a priming coat on wood. One or two coats of semi-gloss paint should then be applied over the thoroughly dry prime coat, or if a full-gloss finish is desired, the last coat should be a high-gloss enamel. A miniature painting, as the name signifies, is an intricate, colorful illuminations or painting, small in size, executed meticulously with delicate brushwork. The colors used in miniatures are generally derived from natural sources and materials. Some of the paintings use pure gold and other precious gems and stones to extract the colors for beautifying these miniature paintings. India has a long and varied tradition of miniature paintings. Painting Hard Spots. Specialized aids with built-in know, how tackle the hard spots for you.
Remove side view mirrors (unless they're to be body color) as well as exterior door handles and locks. This will take some extra time because you need to remove the interior door panels to get these off, but it's worth it. Head lights, tail lights, marker lights and license plates should come off too, but you'll need them in place to drive to the paint shop. So bring some tools so you can quickly take these off once you arrive. Depending on the year Mustang you can just take off the chrome bezels or rings. The shop can then easily mask the headlight or tail light itself and still get plenty of paint around the edges. Now here comes the fun part doors and wood work. This is where most people opt to use latex which is a huge mistake. Your home is your biggest investment don't cut corners on it's aesthetics. You want the finish on your woodwork to stand out from the walls especially if you have crown moulding or waynes coating. Don't be fooled by water based products that claim to give the look and finish of oil. It's just good marketing preying on people's fears of painting with oil. Don't believe the hype as those samples they show you have 3 or 4 coats that have been professionally sprayed in a dust free environment. You will not get the same results I can promise you that. You have a choice of semi-gloss or gloss finish. I prefer gloss because to me it gives you a bit more durability and shine. Either one will be fine for your project. Now let's get started. STENCILING. You may want designs on the walls, or perhaps even on floors and ceilings, in some of the rooms or hallway. You may buy or make your own stencils, which should be on heavy paper, stencil board, plastic, or metal. Avoid stencils made of lightweight paper which will get soaked when touched by wet paint. Your paint dealer will suggest the best paint for you to use, as it will depend a great deal on the surface over which you want to put the stenciled designs. Generally a heavy paint is used, so that it will not spread under the stencil while you are applying it. When all of the spraying is complete, its time to remove all masking tape and paper and start touching up your entire home. This step is pretty time consuming because this is the final stage that really makes your home look good. The more time you spend here, the better your home will look.