Obviously, when mistakes like this occur paint companies have nothing to lose. Whenever people pick paint colors that they are unhappy with, the paint company does not have to refund the customers' money. In fact, no paint brand in the country will allow you to return paint once you have purchased it. Even better (for the paint company), since the customer is unhappy with the paint color they chose, they are probably just going to buy a whole new batch of paints! Materials and their application, every paint manufacturers paint will vary. If you are freshening up old walls and painting back to the existing color, the product doesn't have to be high end or have good coverage. If you need to paint a dark color over light color or light color over dark, you may want to consider purchasing a top quality paint to avoid multiple coats. I suggest Valspar, Pittsburgh or Benjamin Moore top of the line wall paint. These brands work well for straight out of the bucket use and are application friendly. Sherwin Williams is not my first choice because the coverage is poor and you will have to apply multiple coats but, it does apply, fluently. If you find a product does not apply well, maybe it is to heavy and/or sagging on the wall, you may need to thin the paint with a little water, this will reduce the coverage but make the paint flow better and lay down nicer on the surface. I do recommend latex paints for all applications, these days a good high end latex is as good as oil paint and your tools clean up much easier, it will also be less harsh on the respiratory system. The only situation I recommend oil paint, is as a primer/stain blocker over stains that "bleed" through the paint. You can get a stain blocking oil primer in a convenient spray can and spot prime any trouble areas before painting and in the case you need to prime all of the wall due to smoke or water damage, I recommend getting it in gallons and rolling it on where the stains are present. Don't forget proper ventilation and/or a respirator when using the oil based primers! Alkyd has solid advantages overriding the slight cleanup in-convenience. It is exceptionally tough and very resistant to scrubbing. It stands up well in the trouble spots - trim, bathroom, kitchen. And it is easy to apply, producing a smooth, even finish free of streaks and brush marks.
When you plan with split complementary colors, you begin with a single reference color. Next, choose a color from either edge of the complementary color and use it. While the complementary color scheme is a little more obvious, this scheme can fail totally if you just use paler versions of your warm colors. By the same token, picking a a warm undertone for the main contrasting color and combining it with two cool tones will showcase the warm tone. The first step is to cover the surface with a coat of paint, using your regular paint brush, or spray, or roller. Then, while the surface is still wet, take the dry stipple brush and energetically with short strokes drive the ends or the bristles into the wet paint. Be sure not to brush across. The result will be clusters of dots. Every few minutes wipe the brush with a cloth, to keep the bristle ends clean and dry. Mixing. Paste paints, such as aluminum, resin-emulsion, and lead-in-oil, should be stirred with a stiff paddle and reduced to painting consistency with the liquids recommended on the manufacturer's labels. White - is the concentration of all colors from the physical standpoint, since it is the white light that decomposes into all the colors of the spectrum when refracted in the facets of the glass pyramid. White color goes well with all the other colors, it is universal and brings in the element of elegance.