When it comes to rolling out the walls never ever use a cheap foam roller. Foam rollers never evenly absorb the paint out of the pan and will actually add time to you project and cause more mess. Buy yourself a synthetic professional 3/8 nap roller head for about $6 to $8. Not only will the paint be applied in a smoother fashion you will experience less work and mess. Flat or Dead-Flat Oil - Provides a completely flat, oil-based finish. Generally used on walls but not suitable for areas of high wear. Scuff for paint. Once your Mustang is totally stripped of exterior chrome it's time to scuff up the existing paint. The paint shop should do this also, but on the lower end paint packages they won't spend much time here. It's better for you to do it so you know it's done thoroughly.
Cheaper then doing it yourself. Some would argue that if you're going to all the trouble to fully prep the car yourself, then why not just shoot the paint as well? Why get a shop involved? The answer is simply that you'll get a better job and for less money. Some would argue with this, but the fact is that if you've never sprayed a car before then your first car will have a steep, and expensive learning curve. Laying down an even, consistent coat of paint takes considerable practice. Also, paint and equipment is not cheap. You'll need to buy primer, color coat, clear coat, reducers & catalysts. None of these are inexpensive and you can easily spend as much in paint materials alone as the cheapest paint job at Maaco or similar shop. Water-thinned rubber-latex paint is already an old reliable, though it is only about 10 years old. It accounts for a big percentage of all paint sold and is still the most widely available of the easy-to-use finishes. One new type is a combination vinyl-rubber paint that is said to do a better job on interiors than either vinyl or rubber alone because it dries faster, lasts longer and has less sheen. "Boxing" is a good method of mixing paints. Since paint is a mixture of solids and liquids, it is important that it be mixed thoroughly before using. To do this, the greater portion of the liquid contents of the can should be poured in a clean bucket somewhat larger than the paint can. Then, with a stiff paddle, the settled pigment in the original container should be loosened and any lumps broken up. After this, mix the material in the container thoroughly, using a figure 8 motion, and follow with a lifting and beating motion. Continue stirring the mixture vigorously while slowly adding the liquid that was previously poured off the top. Complete the mixing by pouring the paint back and forth from one container to the other several times until the entire amount is of uniform consistency. If you are going to paint your home and have decided to do it yourself take a little extra time and spend a bit more money to do it right. Colors are subjective, but the quality of materials and painting tools are not. For this example we are going to go through the process of painting the interior of a typical home. In just about every paint job I did I insisted that customers used an oil based paint on woodwork and doors. Not only does oil paint make wood look and feel better it gives you a superior durable and washable finish that water based latex paint can't. There is nothing worse than seeing a newly painted door or frame ruined by fingerprints and other marks.