Hello Kitty (Japanese: ハロー・キティ, Hepburn: Harō Kiti), also known by her full name Kitty White (キティ・ホワイト, Kiti Howaito), is a fictional character produced by the Japanese company Sanrio, created by Yuko Shimizu and currently designed by Yuko Yamaguchi. Sanrio depicts Hello Kitty as a female gijinka (anthropomorphization) of Japanese Bobtail with a red bow and, notably, no mouth. According to her backstory, she is a perpetual 3rd-grade student who lives outside London. Sanrio announced in 2018 that Hello Kitty’s birthday is 1 November. Since the cartoon character’s creation, Hello Kitty has become a media franchise including a product line, clothing apparel, toy-line, manga comics, anime series, popular music, and other media.
Rubber-base paints, which dry to a hard semi-gloss finish, may be used on concrete floors below grade, providing the floor is not continually damp from seepage and condensation. With a seasonal approach to my makeup, not only do I save time, but I save money as well. I now wear my right makeup and have a coordinated closet with coordinated clothing. I look taller, healthier and feel more confident. I receive compliments almost everyday what a wonderful experience! The second part of preparation is surface prep, it addresses covering the surfaces you do not want to get any paint on. A little plastic sheeting will go along way to keeping paint off of floors, window coverings, handrails, cabinets, counter tops, etc... And, if you are not confident with your ability to paint a straight line next to door casing, baseboards, cabinets or hardware protect these surfaces using masking tape. There are two basic types of masking tape white/yellow and blue. The white tape sticks to surfaces better but, can pull off finishes on cabinets or stained woodwork. Blue tape usually will not pull off finishes but, does not stick as well, this will probably be the tape to use for most applications. Always wipe down or dust the surface you will be masking to assure the best tape adhesion possible. If you use blue tape you may need to re-rub down the tape before painting next to it, only mask off areas with blue tape that you will be painting for a given day. With either tapes, do not assume the are a force field that paint will not penetrate, use them as a reference and dry brush the paint next to the edge of the tape and avoid soaking the edge of the tape with a lot of paint, this will cause the paint to "bleed" through giving you an undesired look. If you will need to apply multiple coats of paint, on the first coat, paint as close to the tape as you can, not really getting paint on the tape. With the second coat or a one coat application, you can use the tape more of like a paint barrier and get a little more paint on the tape if you immediately remove each section of tape after painting the section, this will keep the paint from sitting on the tape and "bleeding" behind it. Also, if you get a lot of paint on the tape it is not good to let the paint dry on the tape because some paints (especially the glossier paints) will peel if allowed to dried, with the tape when it is pulled off. White tape should not be left on for longer than a couple of days and I suggest not leaving it on more than a day in areas that receive long periods of direct sunlight. Blue tape can be left on for days, if it will stay on, there again it does not stick as well and may need rubbed down again immediately before painting up next to it.
Materials and their application, every paint manufacturers paint will vary. If you are freshening up old walls and painting back to the existing color, the product doesn't have to be high end or have good coverage. If you need to paint a dark color over light color or light color over dark, you may want to consider purchasing a top quality paint to avoid multiple coats. I suggest Valspar, Pittsburgh or Benjamin Moore top of the line wall paint. These brands work well for straight out of the bucket use and are application friendly. Sherwin Williams is not my first choice because the coverage is poor and you will have to apply multiple coats but, it does apply, fluently. If you find a product does not apply well, maybe it is to heavy and/or sagging on the wall, you may need to thin the paint with a little water, this will reduce the coverage but make the paint flow better and lay down nicer on the surface. I do recommend latex paints for all applications, these days a good high end latex is as good as oil paint and your tools clean up much easier, it will also be less harsh on the respiratory system. The only situation I recommend oil paint, is as a primer/stain blocker over stains that "bleed" through the paint. You can get a stain blocking oil primer in a convenient spray can and spot prime any trouble areas before painting and in the case you need to prime all of the wall due to smoke or water damage, I recommend getting it in gallons and rolling it on where the stains are present. Don't forget proper ventilation and/or a respirator when using the oil based primers! SECONDARY COLORS. When you mix two primary colors together, you get a secondary color. The secondary colors are orange, green and violet. Orange is made by mixing red with yellow. Green is made by mixing blue and yellow. Violet is made my mixing blue with red. Usually on exposed air ducts of galvanized metal a primer coat of zinc dust-zinc oxide paint is used, before the finish coat is applied. Since the trim is the first to go, the main body of the home will be shortly behind requiring painting. If the trim was recently painted, and a few years later the body is ready for paint, all the trim will need to be covered, commonly referred to as masking off. Masking off expends time, labor and material, which adds to the bottom line cost to the remaining 40%, typically costing an additional 25% for masking trim. Thus costing 25% more after both trim and body portions are painted in separate years.