Laval, Cragger, Eris, Razar, Worriz, Gorzan, Skinnet, Rogon and Bladvic’ are friends at first. One day, Cragger wants to visit the Sacred Pool of Chi in the Lion Chi Temple. Laval brings Cragger into the temple. Cragger does not listen to Laval’s advice and slips a Chi into his chest. Cragger says to Laval: “I have ‘Unleashed The Power’!” Then, Cragger goes crazy and runs all over the place. King Crominus, Cragger’s father, and Crunket, Cragger’s mother, go to the Lion Chi temple to recover their son, but it turns to a heated debate. The next day, Cragger brings Worriz to the temple to feel the Chi power. But when they enter the temple, Lagravis, Leonidas, Longtooth and Laval stop them. Worriz runs away quickly. Cragger retreats, but accidentally starts a war with the lions, where his parents disappear down the Gorge of Eternal Depth.
STENCILING. You may want designs on the walls, or perhaps even on floors and ceilings, in some of the rooms or hallway. You may buy or make your own stencils, which should be on heavy paper, stencil board, plastic, or metal. Avoid stencils made of lightweight paper which will get soaked when touched by wet paint. Your paint dealer will suggest the best paint for you to use, as it will depend a great deal on the surface over which you want to put the stenciled designs. Generally a heavy paint is used, so that it will not spread under the stencil while you are applying it. The second part of preparation is surface prep, it addresses covering the surfaces you do not want to get any paint on. A little plastic sheeting will go along way to keeping paint off of floors, window coverings, handrails, cabinets, counter tops, etc... And, if you are not confident with your ability to paint a straight line next to door casing, baseboards, cabinets or hardware protect these surfaces using masking tape. There are two basic types of masking tape white/yellow and blue. The white tape sticks to surfaces better but, can pull off finishes on cabinets or stained woodwork. Blue tape usually will not pull off finishes but, does not stick as well, this will probably be the tape to use for most applications. Always wipe down or dust the surface you will be masking to assure the best tape adhesion possible. If you use blue tape you may need to re-rub down the tape before painting next to it, only mask off areas with blue tape that you will be painting for a given day. With either tapes, do not assume the are a force field that paint will not penetrate, use them as a reference and dry brush the paint next to the edge of the tape and avoid soaking the edge of the tape with a lot of paint, this will cause the paint to "bleed" through giving you an undesired look. If you will need to apply multiple coats of paint, on the first coat, paint as close to the tape as you can, not really getting paint on the tape. With the second coat or a one coat application, you can use the tape more of like a paint barrier and get a little more paint on the tape if you immediately remove each section of tape after painting the section, this will keep the paint from sitting on the tape and "bleeding" behind it. Also, if you get a lot of paint on the tape it is not good to let the paint dry on the tape because some paints (especially the glossier paints) will peel if allowed to dried, with the tape when it is pulled off. White tape should not be left on for longer than a couple of days and I suggest not leaving it on more than a day in areas that receive long periods of direct sunlight. Blue tape can be left on for days, if it will stay on, there again it does not stick as well and may need rubbed down again immediately before painting up next to it. Now, decide WHAT you want to paint. Very important...you do NOT need to know how to draw. That's the great thing about painting, you can create even if you've never had a lesson. Don't get me wrong, art school is great. But don't let the lack thereof deter you from creating. You do not have to have a teacher to tell you how to create. You do need to know a few basic techniques, but from there let your imagination fly! When deciding what to paint, go to some websites about artists or Google famous artists to get inspired. Again, do not let a lack of training deter you from painting! Many of the great artists of the past had no training either. Many can't draw stick figures, but they can paint because the colors give you amazing options of expression! You may also go to my websites mentioned below or Google me to see all the crazy work I've created. My personal preference has been to create a large variety of work to keep it interesting and versatile. I did not want to be that artist who only painted one thing over and over. To me that's boring, and it should be boring to you too. Any known artist of the past has a vast variety of work. You'll also find that it makes it more interesting to you while you're doing it, because you won't ever get bored, you'll always be wondering how it'll turn out.
If paints have been allowed to stand and hard lumps or skin have formed, the skin or scum should be removed, after which the paint can be stirred and strained through screen wire or through one or two thicknesses of cheesecloth. Malabar and Designers Guild offer some striking brights while the new Shades of Sanderson comprises 120 colours tailored to Sanderson's collections. If you are aiming for a more subtle backdrop that will flow through several rooms, it's wise to stick to neutral shades. Kevin McCloud's Elements of Colour for Fired Earth works especially well with our cool, northern light. Usually on exposed air ducts of galvanized metal a primer coat of zinc dust-zinc oxide paint is used, before the finish coat is applied. Reasons to Use Primer with Paint. Primer plays 2 important roles in painting projects. Firstly, if you are painting a wall that has never been painted (with water-based paint) before, primer will allow your new paint to stick (or "mechanically bond") to the surface. Since primer is typically not necessary if the wall has previously been painted, many people skip this step. Unfortunately, doing so negates its 2nd (often, more valuable) role in color coverage.