Stripping all the chrome. One of the single most important steps in saving money on a paint job is to strip your Mustang as much as possible yourself. This means taking off anything and everything that won't be painted. The more you take off the less the painter has to mask around. Masking not only takes their time (which costs you money) but it also results in areas that simply can't get a full coat of paint. If you take everything off, then the painters can simply scuff and spray, which will give you better and more consistent coverage. Remove side view mirrors (unless they're to be body color) as well as exterior door handles and locks. This will take some extra time because you need to remove the interior door panels to get these off, but it's worth it. Head lights, tail lights, marker lights and license plates should come off too, but you'll need them in place to drive to the paint shop. So bring some tools so you can quickly take these off once you arrive. Depending on the year Mustang you can just take off the chrome bezels or rings. The shop can then easily mask the headlight or tail light itself and still get plenty of paint around the edges. Take your time there is no rush. There is nothing wrong with having your project take a couple of weeks.
Use Plain White Primer for Light Paint Colors. In our first case, if you decide to paint a wall in your house with a light yellow color, but the wall is currently a deep dark brown, you will go through bucket after bucket of paint trying to cover that brown, easily doing 4 - 6 coats or more. But if you put down a coat of white primer first, you could be done after 2 coats of paint. The stencil must be held very firmly against the surface with one hand, and the stencil brush worked over it quickly with the other hand. Or, if you have an assistant, it is best for one person to keep the stencil steady, while the other does the painting. In removing the stencil, make sure you pick it up without smudging. Your average paint company knows that their most important advertising is done inside the paint retail location. A brand's paint color display (or color wheel) is its best tool to attract you to their paint. How can a paint company use its own color wheel to lure you to their brand? The answer is easy... color. For centuries, advertisers have used bright, bold colors to focus the attention of customers on their brand. The power of bright colors is evident in signs, logos, and almost every form of commercial marketing. This fact is common knowledge, and yet it still comes as a surprise to many people that paint companies use these same tactics to draw your attention to their line of paint colors inside every home improvement store. Wall primers or primer-sealers are intended to be applied directly to bare plaster, wallboard, and similar porous surfaces to provide a uniform, sealed surface for subsequent coats of paint. A typical wall primer may be made from varnish or bodied-oil vehicle and hiding pigments. It is intended to penetrate only slightly into porous surfaces.