Wood Walls and Trim. New interior walls and wood trim should be smoothed with sand-paper and dusted before painting or varnishing. To preserve the grain of the wood, the surface may be rubbed with linseed oil, varnished or shellacked, and waxed. If an opaque finish is desired, semi-gloss paint thinned with 1 pint of turpen-tine per gallon of paint or the primer-sealer previously described for walls may be used as a priming coat on wood. One or two coats of semi-gloss paint should then be applied over the thoroughly dry prime coat, or if a full-gloss finish is desired, the last coat should be a high-gloss enamel.
The most challenging question and statement a stylist or colorist can receive is: Can you correct this hair color I applied at home? It looks terrible! I personally love doing corrective hair coloring. A lot of hair stylist do not like this area of our field. Be sure your stylist has plenty of experience in this area of hair coloring if you need this service rendered. I really won't go too in depth here about corrective hair coloring, accept that, usually a botched at home color can be corrected with the following: Time at the salon for the correction. Money, as this service can be expensive. Cooperation with, and trust in, the hair stylist's or hair colorist's judgment.
Composition Wallboard. Composition wallboard usually presents no particular painting difficulties if the ordinary precautions are observed, such as making certain that the surface is dry and free from grease and oil. The painting procedure for wallboard is the same as for plaster; it requires a priming and sealing coat followed by whatever finishes coats are desired, or may be given one-coat flat or resin-emulsion type paint.
THE BRUSHWORK. Depending on the art movement and personal peculiarities of the artist, the brushwork can range from delicate and almost invisible to rough and plastic.
Types of Paint. Water-based paints are usually referred to as emulsions and were traditionally used only for interior walls and ceilings. But recently tremendous advances in paint technology mean that water-based formulas, especially the high-performing acrylics, are available for all surfaces, from woodwork to metal, and for interior and exterior use. The advantages of these paints over oil-based ones is that they are cleaner, have less odour and are more environmentally sound. Brushes can be rinsed clean with water.
The principal ingredient in whitewash is lime paste. A satisfactory paste can be made with hydrated lime, but better results are obtained by using quicklime paste that has been slaked with enough water to make it moderately stiff. The lime paste should be kept in a loosely covered container for at least several days. Eight gallons of stiff lime paste can be made by slaking 25 lbs. of quicklime in 10 gallons of water, or by soaking 50 lbs. of hydrated lime in 6 gallons of water. After soaking, the paste should be strained through a fine screen to remove lumps or foreign matter.
If new caulk is applied, main body portion needs to be touched up, and most of the time new paint will not match aged paint even using exactly the same paint out of the same paint can, as sheen difference will come into play.