Scuff for paint. Once your Mustang is totally stripped of exterior chrome it's time to scuff up the existing paint. The paint shop should do this also, but on the lower end paint packages they won't spend much time here. It's better for you to do it so you know it's done thoroughly. By licensing these names, paint companies and retailers are taking advantage of the popularity of these well-known brands to attract you to these paints; that way they don't have to use obnoxious colors to bring your attention to their color wheel. If you look at the colors in these displays you will notice that they are generally missing those bright, saturated tones. Instead, most of the colors are more neutralized. Naturally, these colors are much more attractive to paint on a wall in your home. Airless Tip: If you have somebody who can start masking off the trim, have them start on that while you convert the airless to a new color. When changing colors with an airless paint sprayer it is a good idea to have a second bucket filled half way with clean water. Place the intake hose in the clean water gently without getting the old color everywhere in the water. Take the tip out of the airless and spray all of the old paint out of the hose and back into its original paint bucket. Be careful when doing this that you recognize when the paint starts turning watery. When it does point the gun into the first bucket and spray until it looks pretty clean. It doesn't need to be perfectly clean. When it looks good, clean off the intake line in the clean bucket and get the old color off the intake line. Now place the intake line inside of your new trim paint.
Gloss - These paints have a high sheen level and are usually used on woodwork. Use Tinted Primer for Dark Paint Colors.In our second case, suppose you want to apply a deep, dark blue to a beige wall. The good news is that it will be easier to darken a light color than it was to lighten a dark color. In fact, it may only take 2 - 4 coats to get total color coverage in this scenario. The bad news is that if you start out with a white primer you are already moving in the wrong direction. Doing so could increase the number of paint coats you need to 3 - 6... plus the coat of primer! That's a lot of painting! Step four: the key to a finished looking painting is to build it just like a house...and by that I mean layers. Paint it in the reverse order in which the eye sees it to make it three-dimensional. By this I mean paint what's farthest from the eye first, and build layer upon layer towards the eye. In other words, do the background first because it should be the farthest from the eye, then add the objects on top of that, and then add the shadows to complete the look. Ultimately it's common sense. If you paint a bowl of fruit, the bowl and fruit need to sit on top of that background, much as it would in real life. However, if you put a coat of pure white primer (which has a score of 0) on top of the brown color wall first, this immediately brings your luminosity score down to 4 (8 + 0 = 8/2 = 4, the average). This means you may only need one coat of yellow paint to give you the right hue and saturation. In reality of course, you will always want to do at least 2 coats. But even with a total of 3 coats (primer and paint) you are way ahead of the paint-only option.