Primer paints may be oil- or water-based and are used to seal unpainted surfaces to prevent covering coats of paint soaking in. The appropriate type of primer should be used for the surface being painted - wood, metal, plaster or tiles. There are some 'all purpose primers' available which are designed for two or more of these surfaces.
When spraying your house, it is a good rule of thumb to spray in the direction of the grain of the material. So if you have siding that runs horizontal, you want to spray in a horizontal style. Also, when you go to spray, the gun should be approximately 12" from the material that you are spraying. Do not pull the handle to spray with your hand still. This will spray a lot of paint in one spot causing it to drip. So have your hand moving when you go to depress the handle. This will give you an even look to your paint.
Flat or Dead-Flat Oil - Provides a completely flat, oil-based finish. Generally used on walls but not suitable for areas of high wear.
The term paint is used to include paints, varnishes, enamels, shellacs, lacquers, and stains. • Paints are composed of mineral pigments, organic vehicles, and a variety of thinners all combined. • Varnishes are resins dissolved in organic thinners. • Enamels are pigmented varnishes. • Shellac is lac gum dissolved in alcohol. • Lacquers may be both pigmented or clear - the liquid portion usually is treated nitrocellulose dissolve in thinners. • Stains may be pigmented oil or a penetrating type. Many of these materials, such as paints, varnishes, and lacquers, are formulated for specific purposes: • Outside house paints and exterior varnishes are intended to give good service when exposed to weathering • Interior wall paints are formulated to give excellent coverage and good wash-ability. • Floor enamels are made to withstand abrasion. • Lacquers are formulated for rapid drying. • There are also formulas which provide extra self-cleaning, fume- resisting, waterproofing, hardening, flexibility, mildew-resisting, resistance to fading, and breathing qualities.
The lite version of Galkyd is simply thinner. I use it more than the other. I love it. Paintings I did 16 years ago using Galkyds look as pristine as the day I painted them. You'll also need a canvas and some paint. I buy a tube of red, green, blue, purple, yellow, brown, white and black. I prefer what's called Ivory Black and a soft mixing white as you'll add white to a lot of different colors to make lighter versions. From these basic colors you can make any exotic color by mixing them in combination's. Be creative and experiment. And don't be afraid of color, because color is the most popular in museums! The bright paintings are historically the crowd favorites. As for color variety from these basic colors, mix red and white to make pink, mix yellow with green to make lime green, white with blue to make light blue, white with black to make gray, etc. Use your common sense and play with it! You'll also need pencils, an eraser and some Turpentine or Turpentine substitute. Keep your brushes soaking in it in a plastic cup to keep them clean and ready for your next color choice.... and to keep them from drying out.
Traditional Paints. Available from specialists such as Farrow & Ball and The Real Paint & Varnish Company, lime wash and distemper paints can be useful for restoration projects, although some of the contents are potentially hazardous and can irritate eyes and skin. Use the modern equivalents where possible, as these are usually safer and more effective.
A flat, semi-gloss, or high-gloss finish may be applied to the primed surface. For a flat finish, two coats of flat wall paint should follow the priming coat. For a semi-gloss finish, one coat of flat wall paint and one coat of semi-gloss paint should be applied to the primed surface. For a high-gloss finish, one coat of semi-gloss paint and one coat of high-gloss enamel should be used over the priming coat.