Paste and powder paints should be mixed in quantities sufficient for immediate use only, as these materials often become unfit for application if allowed to stand for three or more hours.
Yellow color is sunny and light. Historically this color symbolizes gold and wealth, and in the East it is a symbol of eternity and greatness. This color creates optimistic and bright mood and goes together greatly with the other colors of the interior. At the same time the warm sunny tints never carry a negative charge. Yellow color creates an impression of lightness and joy. It frees you from the weight of worries, problems, and limits. This color is hope and expectation of big happiness in its multiple forms starting with sex and going up to some philosophical and religious outlooks.
Limewash - Made from slaked lime and water, this paint is good for porous surfaces such as brickwork, render and plaster and gives a chalky finish. It is available from specialist companies.
Feel free to email me if you have questions at the email addresses below. But most important, you'll find that with each painting you'll get better and better. Carry forward everything you learn from each work and eventually you'll have real talent! But only if you keep at it. And don't worry about people telling you you're crazy. They told that to van Gogh too! Sweet justice Vincent, sweet justice. He's certainly getting the last laugh, isn't he? And the world will know who Vincent van Gogh was for the rest of time. Not a bad gig.
If paints have been allowed to stand and hard lumps or skin have formed, the skin or scum should be removed, after which the paint can be stirred and strained through screen wire or through one or two thicknesses of cheesecloth.
White color symbolizes the purity, immaculateness, innocence, virtue, and joy. It always inspires, helps, fills you with faith. White means absolute freedom from obstacles and freedom for all possibilities.
Once you figure out which position is prime and which position is spray, place the valve in the prime position and grab the primer hose. Point the primer hose in the empty bucket near the top and at an aproxx.45 degree angle from the side (the reason for this is that there is likely to be pressure still built up in the airless and when you first switch on the airless to prime it, paint will likely burst out of the primer hose and you don't want to have it go everywhere). Now turn the airless paint sprayer on and you will see that the airless is sucking up the new paint and pumping out the primer hose. At first you will typically see a cleaning solution come out followed by your paint. When you see your paint coming out switch over the primer valve to the other position and you will see the airless pumping paint into the main hose.