Stripping all the chrome. One of the single most important steps in saving money on a paint job is to strip your Mustang as much as possible yourself. This means taking off anything and everything that won't be painted. The more you take off the less the painter has to mask around. Masking not only takes their time (which costs you money) but it also results in areas that simply can't get a full coat of paint. If you take everything off, then the painters can simply scuff and spray, which will give you better and more consistent coverage.
Set up costs are normally included with any home improvement job, painting separate times for complete exterior painting can essentially cost double, unless agreed before work begins in painting quote.
Limewash - Made from slaked lime and water, this paint is good for porous surfaces such as brickwork, render and plaster and gives a chalky finish. It is available from specialist companies.
Again, as with Warm and Cool, hair is the most important characteristic in determining Light or Deep. Women with Light coloring tend to have blond, light brown, or light red hair. Women with Deep coloring tend to have brunette, dark red, or black hair.
Always use a sanding block for flat surfaces. Just your hand behind a thin piece of sand paper can leave grooves and low spots. It's also easier on your hands. For inside curves try wrapping the sand paper around a short section of garden or heater hose. This will help approximate the concave curve and help stay away from sanding through hard edges. On hard edges, like the top ridge of a fender or leading edge of a hood, you need to do this by hand. A sanding block will quickly dig right through the paint on a hard edge and take you down to bare metal. This means primer and more sanding.
Can you feel the rhythm in repeating some color or combination?
Use Tinted Primer for Dark Paint Colors.In our second case, suppose you want to apply a deep, dark blue to a beige wall. The good news is that it will be easier to darken a light color than it was to lighten a dark color. In fact, it may only take 2 - 4 coats to get total color coverage in this scenario. The bad news is that if you start out with a white primer you are already moving in the wrong direction. Doing so could increase the number of paint coats you need to 3 - 6... plus the coat of primer! That's a lot of painting!